13636661571
d |
395 mm |
D |
525 mm |
B |
65 mm |
Cr |
200000 N |
Cor |
640000 N |
Ca |
265000 N |
Coa |
2190000 N |
Limiting speed |
200 rpm |
H1 |
42.5 mm | Outer ring contact surface height |
J |
415 mm | Inner ring fixing hole pitch diameter |
|
|
0.05 mm | Height contact face outerring H1 upper tolerance |
J1 |
505 mm | Outer ring fixing hole pitch diameter |
d1 |
9.3 mm | Inner ring fixing hole diameter |
|
|
-0.05 mm | Height contact face outerring H1 lower tolerance |
d2 |
15 mm | Fixed hole counterbore diameter |
H2 |
22.5 mm | Outer ring contact surface height |
a |
8.2 mm | Fixed hole counterbore depth |
|
|
0.03 mm | Height contact face outerring H2 upper tolerance |
|
|
-0.03 mm | Height contact face outerring H2 lower tolerance |
|
|
46 | Number of inner ring fixing holes |
d3 |
9.3 mm | Outer ring fixing hole diameter |
D1 max |
487.7 mm | Inner ring maximum plate diameter |
|
|
45 | Number of outer ring fixing holes |
n |
48 | pitch |
DM |
486 mm | Diameter of dimensional scale on shaft locating washer |
t |
7.5 ° | Pitch circle separation angle |
C |
20 mm | outer ring width |
G |
M12 | Number of thread extraction holes |
|
|
3 | Number of thread extraction holes |
MA |
34 Nm | Tightening torque |
|
|
2 | Number of fixing screws |
t1 |
6 µm | Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. |
T min |
-30 °C | Minimum operating temperature |
T max |
120 °C | Maximum operating temperature |
