13636661571
d |
170 mm |
D |
260 mm |
B |
122 mm |
Cr |
960000 N |
Cor |
1750000 N |
Cur |
224000 N |
Grease lubrication speed |
740 rpm |
Ca1 |
99 | Installation diameter for snap ring wre (excluding delivery), tolerance: 0 / - 0,2 |
C |
121 | Outer ring width |
C1 |
107.2 | Ring groove distance |
Ca2 |
97 | Applicable to the installation diameter of stop ring according to DIN 471 standard (excluding delivery), tolerance: 0 / - 0,2 |
D1 |
254 | Ditch diameter |
d1 |
201 | Inner ring flange diameter |
d2 |
220 | Seal diameter (retaining edge) |
m |
5.2 | Slot width |
rmin |
0.6 | Minimum chamfer size |
d3 |
282 | Outer diameter of snap ring wre |
t |
2 | Bevel Width |
d1min |
201 | Minimum diameter of shaft shoulder |
X |
100 | Rolling element spacing |
ramax |
0.6 | Maximum cavity radius |
|
|
30 ° | Chamfer |
|
|
-0.2 | Snap ring distance tolerance, lower deviation |
|
|
-0.2 | Distance tolerance of locating ring |
|
|
0 | Snap ring tolerance, large distance |
|
|
0 | Locating ring tolerance, large distance |
|
|
0 | Annular groove distance tolerance, lower deviation |
|
|
0.2 | Annular groove tolerance, large distance |
Tmin |
-30 °C | Minimum operating temperature |
Tmax |
120 °C | Maximum operating temperature |
