13636661571
d |
90 mm |
D |
140 mm |
B |
67 mm |
Cr |
305000 N |
Cor |
510000 N |
Cur |
70000 N |
Grease lubrication speed |
1410 rpm |
Ca1 |
54 | Installation diameter for snap ring wre (excluding delivery), tolerance: 0 / - 0,2 |
C |
66 | Outer ring width |
C1 |
59.2 | Ring groove distance |
Ca2 |
51 | Applicable to the installation diameter of stop ring according to DIN 471 standard (excluding delivery), tolerance: 0 / - 0,2 |
D1 |
137 | Ditch diameter |
d1 |
109.5 | Inner ring flange diameter |
d2 |
118 | Seal diameter (retaining edge) |
m |
4.2 | Slot width |
rmin |
0.6 | Minimum chamfer size |
d3 |
152 | Outer diameter of snap ring wre |
t |
1.5 | Bevel Width |
d1min |
109.5 | Minimum diameter of shaft shoulder |
X |
54 | Rolling element spacing |
ramax |
0.6 | Maximum cavity radius |
|
|
30 ° | Chamfer |
|
|
-0.2 | Snap ring distance tolerance, lower deviation |
|
|
-0.2 | Distance tolerance of locating ring |
|
|
0 | Snap ring tolerance, large distance |
|
|
0 | Locating ring tolerance, large distance |
|
|
0 | Annular groove distance tolerance, lower deviation |
|
|
0.2 | Annular groove tolerance, large distance |
Tmin |
-30 °C | Minimum operating temperature |
Tmax |
80 °C | Maximum operating temperature |
